I had 1 LCD monitor and to make it work I had bought a FM Modulator and it wired up to a 12v and ground for power and then it had 3 RCA cables for either a montior or game system. Now I ordered 2 more monitors and prolly going to get one more so i will have a total of 4 monitors. Every one of my mitors has 3 RCA cables on each. My modulator only has a hook up for 1 monitor. My question is, how do I run 3-4 monitors? I need some kind of adapter off the modulator that has hook ups for more than 1 set of RCA's. I tried radio shack but they had nuttin. What do I need to make this work and how should I make it work and where can I get something from !?

You need y adapters for the RCA's.

All monitors will show same thing though if that what you want.

Terry

96 Eagle talon ESI
Star Stage II - Boost/oil/EGT gauges

97 Eclipse
Greddy header/evo exhaust - SFMU/return line - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: Apexi AFC, HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)

okay a fm modulator is not use for a video signal is it use for audio it splits the antenna signal so you can utilize the radio as a input to play audio, for you to run 4 monitors you would need a video signal such as a dvd player but the common dvd player would not support 4 monitors you would need a video amplier but if your not worried about the picture quality go ahead and run them in series

and more vertical door hinges from Decah x(

You need this. You CANNOT use a Y cable.



http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F003%5F010%5F001%5F000&product%5Fid=15%2D1172