Ok guys, I finally finished building my falsefloor and amp rack and all that good stuff. Sorry these pics suck my my camera sucks (getttin a new one soon). Stilla few things I need to do but here it is. 1 jl w7, i have 6x5 Mb Quart components up front with .8" titanium Mb Quart tweets, and pioneer 6x9s in the back...all interior speakers are amped.

looks good shock. what did you use for the floor?

later
billy:thumbsup

>looks good shock. what did you use for the floor?
>
>later
>billy:thumbsup

MDF and fiberglass...

VERY nice! :thumbsup loos like you should add a lint roller to your inventory of tools though. :P

that fiberglass work looks flawless, i thought it was painted plexi when i first saw the pics.

>VERY nice! :thumbsup loos like you should add a lint roller
>to your inventory of tools though. :P
>
>that fiberglass work looks flawless, i thought it was painted
>plexi when i first saw the pics.

It actually is plexi painted from the other side. I tried doing it just with fiberglass and I couldn't quite get it smooth enough and I was worried it would get scratched up. The box itself is made with fiberglass and MDF..the plexi is just a way a making it look nice. Also you can't really tell because the pics are crappy but the paint is color matched so it shines nice when the light hits it. I am going to try and get my new camera here shortly so I will take some better pics with that....and question: Car sounds great and everything but I still have that annoying "bouncy trunk" when my bass hits. Whats the best way to get ridda that? (if possible or reduce even) TIA!....Oh and yeah it was dirty :)

looks nice as hell, thats a w6 right?

W6's are quite rare and are now discontunued. that's a 12" W7 i think. it's pretty good looking.

>looks nice as hell, thats a w6 right?

w7 & ty

"I still have that annoying "bouncy trunk" when my bass hits. Whats the best way to get ridda that?"

three easy things to try:

1) wrap a piece of carpet or felt around the latch for the trunk lid (the upside-down "U" piece on the bottom) to tighten up the connection between the trunk lid and the body

2) check the liscense plate, put some dynamat or similar behind it if thats whats rattling...many people overlook that area

3) check the wiper. not much you can do here but remove it, but mine rattled like CRAZY (lifted well off the window) when i had a system in my trunk.

other then that, its the standard dynamat/foam/misc. damping procedure. its all a matter of tracking down what is vibrating and fixing it.

>1) wrap a piece of carpet or felt around the latch for the
>trunk lid (the upside-down "U" piece on the bottom) to tighten
>up the connection between the trunk lid and the body

Will try that...

>2) check the liscense plate, put some dynamat or similar
>behind it if thats whats rattling...many people overlook that
>area

Its not rattling there anymore...had a plate cover and took that off because it was.

>3) check the wiper. not much you can do here but remove it,
>but mine rattled like CRAZY (lifted well off the window) when
>i had a system in my trunk.

No wiper to worry about :)

Yeah my major rattle it the top of the hatch bewteen the very back and the start of the hatch window.

"Yeah my major rattle it the top of the hatch bewteen the very back and the start of the hatch window"

try putting a piece of carpet or felt inbetween where the plastic panel meets the metal. i had all of the plastic pieces in the trunk done like this previously, and it worked wonders. that will work to cure interior rattles, and may work for exterior rattles as well. if not, just add some dynamat or generic product the the area.

haha the penguin fell down


o nice enclosure btw

>
>o nice enclosure btw


lol thanks

Sweet job man. Hope you come to the next indy meet so we can have a bump off haha.

>Sweet job man. Hope you come to the next indy meet so we can
>have a bump off haha.

Yep, I will be there, bump and all.:)

very nice:thumbsup wish i could do something like that it looks great