im hookin up my friends alarm in his 99 GS i got everything working but the damn door trigger wont work right, i know its a negative trigger and when i set the alarm at a negative trigger it doesnt recognize it and wheni set it at positive it says the doors alwayz open...Has anyone ran into this issue before and if so what did u do to solve it?

Are you sure you have the right wire? It should be a red/green wire in the driver kick panel, which sees a negative ground when a door is opened. The alarm should be set to see a negative ground door trigger. There are several wires that color in the driver kick panel, so be sure you have the right one. If you have a 12v test light, ground the light's lead, and probe the red/green wire. If the door is open, the light will not be lit, and when you close the door(just push in the door pin), the test light will light up.

i'll pop out the test light tomorrow morning when he comes back, damn i should have thought of that

atleast its not like mine, i have brand new door triggers in and wired up right, but they light will not work even if the door is open, i have took it to my friend which is a pro installer and he can't figure it out either

ya just tap into the red/green wire under the dash. make sure you grab the one that picks up both doors and the trunk. there should be a white 3 wire mini harness with 3 red/greenwires coming out from it. just use a multimeter and test which one's which.

-marc

='95 RS 5spd Red=
Matrix CAI
A'pexi Turbo N1
Hanabi 8000k HID
SPAL Deluxe Power Windows
Nakayama GT5 17's
Ractive STB
GSX Calipers
AEM Rotors

255 is fricken short