i just bought pioneer 220w rear 6x9s from my friend for 40 bucks. i took everything apart but now it looks like they wont fit at all. what will i have to modify for these to work? did anyone else get these in with a nice fit? how far can i go until the magnet hits the metal from the car? anyone?thanks

performance: K&N intake, 2.5 piping w/ magnaflow, msd wires, pacesetter header, ported tb, custom short shifter
suspension: 1.5 tenzo drop, rear strut bar.
looks: stock skirts, stock 16s, leather interior
future: rear disc, star stage 1

I did the same thing a few months back. There's supposed to be a special bracket that you can get, but I have no idea where to find one. I need one to so if you find it, let me know. For now I just bought two 6x9 boxes and put them in the hatch mounted to the back of the seats. It sounds pretty good, and it only took up about 6 inches of hatch room. The boxes were like $20 each from Wal-Mart. Good luck.

-Sir Zyrion
"Gemini GS"

i heard itll be fine with just grinding down the plastic

performance: K&N intake, 2.5 piping w/ magnaflow, msd wires, pacesetter header, ported tb, custom short shifter
suspension: 1.5 tenzo drop, rear strut bar.
looks: stock skirts, stock 16s, leather interior
future: rear disc, star stage 1

I use Eclipse brand 3-way 6x9's in the rear plastic pods, and they sound excellent as the pods make for a nice small enclosure for the woofer. Just take a dremel and cut the round hole into an oval shape until the speaker's basket clears and mounts into the pod. You shouldn't have a problem with the magnet hit the metal behind the pod, but don't hold me to it as some speakers will need more mounting depth than others. As I said earlier, mine fit without any problems and sound spectacular. Let me know how it goes for you.

1996 Eclipse RS / 5-Speed / More at www.dalnetcars.com
Mark Galyan - Greenwood, Indiana

I did the same thing and the magnet hit the wheel well. I banged it with a hammer until the speaker would go in without any problem.

The GST's came with 6X9's in the back - how are they set up?? Anyone know where you can get the brackets the GST's use?

.
Yes, the windows are mirrored.

1999 GS Special Edition

Jeez, just cut yours out. They're the same as the GS/GST with the infinity sound system. If your magnet hits the back either beat it with a hammer or get an extra sheet of ABS and cut out a spacer. It's not that hard guys :)

Chill out man. Most of us here know that you can cut out the brackets to fit 6x9's. The only reason I'm asking is b/c I already cut mine up pretty good for my current speakers and I want to change them again but I don't I think I can reuse them now ... so I need new brackets. I'll check satan and let you all know what the GST 6x9 brackets go for.

.
Yes, the windows are mirrored.

1999 GS Special Edition