how do you by-pass the e-brake wire on a clarion vrx815. i heard you should ground the wire, does anyone know?

Evan B
97 GS
Stamford CT
EvMan2345@aol.com

(Its actually stock sarrono red, but my digicam sucks, so it looks like a different color)

I found this in google.

I don't know if this is true or not so if it fucks your shit up, it's not my fault. ;-)

http://www.socalaudi.com/forum/topic.aspx?topic_id=3732&category_id=11



________________________________________________________________________________________
Car Sold


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

thanks fast420a, i found that site too but i think thats wrong, but i am just seeing if anyone knows for certain

Evan B
97 GS
Stamford CT
EvMan2345@aol.com

(Its actually stock sarrono red, but my digicam sucks, so it looks like a different color)

Well you either need to ground that wire, or send it a positive signal. *most* use a negative ground signal, so you should be able to just ground it. I would double check the install manual if you have it, or check out Clarion's website for the wire diagram. If you cant find it there, e-mail them or call em up. I say a ground though, because most E-brake's use a negative ground switch to turn on the dash lit brake light.

^^^yup, just ground it, im almost 99% sure that clarion uses a ground signal, as thats what 99% of the cars out there are going to have.

on my clarion touch screen all we did was ground the wire. that is what the ebrake does so u can watch it without settin it. playn playstation while flyn dwn the hwy on a road trip is truley a trip.
ben