Go back to previous topic
Forum nameAudio, Alarms, AV
Topic subjectbattery connection
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=10&topic_id=420
420, battery connection
Posted by vegasdsmr, Dec-31-69 06:00 PM
Sean G
99 gs ounce edition
http://seangordon1.tripdod.com
site is messd up 4 awhile

421, RE: battery connection
Posted by vegasdsmr, Dec-31-69 06:00 PM
sorry, i hit return/enter.

anyways, i took my shit to satan yesterday, and they did some diagnostic check and sum othr shit, but when i leave my stereo sounds like shit. now the positive terminal on the battery has always been all corroded and shit ever since i got my system. anyways, i get into my ride and start drivin, turn her up and its all barnk, barnk, not boom boom like it should be, and im like WTF, i call the dealer and talk shit to them.

well i figured it out, when the guys who installed my amp put the power connection to the battery, they just shoved the wired between some other connectors and tightened it up. the wire had seemed to get out of funk and not connect with the terminal like it should so, needless to say, the corrosion ate into the wire like 2 inches so i chopped it off and put a connector on it. cleaned up the battery terminal a lil bit, and put the connector back on the positive terminal.

has this happened to anybody w/ the corrosion eating into your power wire?? it ate into it deep, and so much that when i first looked at the connection and grabbed the wire, it popped out and was all white and sticky.

im not running much power at all, like 300 max to 2 speakers bridged at 150x2. so like 100 rms if it is even that high.

i got 100 watt rms pioneers, and my POS amp distorts them when i turn it up. its a swap meet amp, mobile authority 54xi. i dropped 100 bux on the amp, and 100 bux on the speakers with a 4 yr warranty on them biatches. i have blown 2 of them so far, and got 3 yrs left to blow some more.

i guess im in need of a better amp, speakers, and a box thats the right size for the speakers, but for now my shit is alright

anyways, after i put the power cable onto the battery the correct way, my system is back to normal(if you wanna call it a system)



Sean G
99 gs ounce edition
http://seangordon1.tripdod.com
site is messd up 4 awhile

422, RE: battery connection
Posted by koolade9, Dec-31-69 06:00 PM
get a new postive terminal that won't corrode...

__________________________
...just my $.02
95 GS


423, RE: battery connection
Posted by eclipse804, Dec-31-69 06:00 PM
BTW, I only have corrosion on my negative terminal, but how do I safely clean that off?

eclipse804@hotmail.com
http://www.importvenom.com
Import Venom



424, RE: battery connection
Posted by koolade9, Dec-31-69 06:00 PM
cocacola(I shit you not)

switching to a highquality set of brass or gold plated terminals always helps though.
__________________________
...just my $.02
95 GS


425, RE: battery connection
Posted by Marctronixx, Dec-31-69 06:00 PM
coke aint just for drinkin.... thats why i dont drink dat $hit...

the acid in the coke wil eat the corrosion away.. and your stomach lining with frequent use... :o





'99 Eclipse RS (Special Edition)
Iceman Cold Air Intake (Blue)
Powerslot X-drilled rotors w/Axxis Metal Master
brake pads
Myrtle Shoot 18's w/ 215-35-18 Nitto
NT450 Extreme Tires
Indiglo guages and lighted valve stems
Custom audio/video system
NGK BK 5's
Magnecore KV-85 plug wires

1/4 mile in 37.220 sec's ;)
426, RE: battery connection
Posted by vegasdsmr, Dec-31-69 06:00 PM
turns out that i had everything wired good at the end and i go to start the car, and because of the corrosion, it ate through the terminal connector so it wasnt touching the terminal at all. with it tightened all the way, it would slip right on and off and didnt have any type of connection. i was playin with it cuz i was gunna put a small peice of metal inbetween the terminal and the connector for a quick fix, and the connector snapped in half cuz it was a POS.

anyways,

i hooked up a new terminal from da zone for 2 bux and it was alright except it only had one spot to jam the big wire into,and i got 4 wires going to the positive terminal. needless to say, i had to do some nonprofessional battery terminal connector mod so that all of the wires would be connected. also, i bought the terminal covers so that i wouldnt short anything out, and i had to cut that fukker and electrical tape it on cuz its supposed to slide right over the wire and terminal, but it was hella small.

Sean G
99 gs ounce edition
http://seangordon1.tripdod.com
site is messd up 4 awhile

I generated this page in 0.0087389945983887 seconds, executing 7 queries.