Need help finding a few things:

1. (+) and/or (-) Door wires
2. (+) and/or (-) Door lock/unlock wires
3. Parking light wires (need to tap after the relay)

please help!

Try this out. This should be everything you need...

http://www.directechs.com/wtechsoft/doc/52495.txt

Thanks man... you're a fuckin genious! I searched all over the net and I've been at this all day now and I'm ready to finish it up. Guess I'mma spark up another fatty and soldier away. :P Seriously, though... thanks!

Dougie i just wanted to say that your nitrous solenoids look sweet!!
what shot is that and how much was your kit?





Northstar White 98 GS - GReddy
Evolution-AEM
intake-Clutchmasters
2400-Sprint Springs-CF
Interior- 2 Jl 12 w3's-monster
cable - alpine cva-
jl monblock class d 500/1 -
altezza's- CF floormat's and
some mo ish...

Thanks... it's a 70 shot and I love it. The standard NOS kit was $500 at summitracing brand new. I also bought a bottle heater, purge valve, bottle mounted pressure gauge, cockpit mount Autometer pressure gauge, accel plug wires, and NGK plugs at the same time from summit. The total was close to $900 but you can pick up used kits for cheaper usually.

Hey no prob man. If you have any q's on the install, just speak up. Have fun :)

Well I'm done other than a couple of things.

I still can't seem to find the correct wires for power door lock/unlock in the dash. Am I going to have to tap the ones inside the drivers door?

Also, where's a good place for the shock sensor? Will it work fine in the center console? Thanks.

Nevermind... I found the door lock/unlock wires in the first relay harness by the interior fuse panel. Damn that's a hard place to strip and solder wires!

Just need to do the remote start harness now then I'm done. I really like the alarm system. I recommend the DEI/Viper system for anyone who's going to install it themselves. Don't try the install yourself unless you're mostly familiar with 12V electronics and your car's layout.