Yes I know another thread about wiring sorry!!

and sorry about the cell pics.

Well I just bought a new radio (Dual XDMA6855) because my other one got stolen. Anyway when they stole my other radio they only left the stock wiring there so now im splicing the wires together. And yes I know I should probably get the connector to make things easier, but I am BROKE! haha.

I followed a diagram of mitsu's stock wiring and used the manual from the radio that I bought to splice SOME of the wires together, but I have THREE STOCK WIRES LEFT AND FOUR AFTERMARKET WIRES LEFT.

I also was wondering when wiring am I supposed to wire (+) to (+)
and (-) to (-)?


First Pic is stock wiring that is left....

-Black w/yellow greenish? stripe

-White w/black stripe

-Green w/white stripe



Second Pic is Aftermarket wiring that is left....

-Black (I know this one is ground)

-Gray w/black stripe

-White

-Blue



Oh oH OH! is there anyone around my area that can do it!?!??! Not bestbuy or circut city.
Illinois north side.

Thank for reply in advance. I would really love to get this to work.

Wow nothing from anyone?

You will have extra factory wires, connect that ground to a bolt or something under the dash. Blue goes to your power antena if you got one. You should have a white w/blue stripe and a solid black wire coming from the factory harness, it may be cut up high so you don't see them. Double check the colors of all the wires you already spliced too.

http://www.installdr.com/Harnesses/Mitsubishi-Wiring.pdf

*Edit* Just looked at my harness and the grey w/black stripe wire connects to a black w/red stripe wire. White to white w/blue stripe.

I ended up taking all the wires apart and am going to wait till my dad gets home this weekend so he can help, but now I have another problem.

When I took everything off; my garage opener (the one on the visor) doesn't work anymore, the stock security alarm doesn't work, and I have the automatic lock thing that has the panic button on it doesnt work to lock the doors.(lol sorry i dont know the name)

Hopefully I didn't blow a fuse! Any ideas?? What should I do??

Either you got a blown fuse, or you knocked a plug loose somewhere behind the radio.

Damn, yea im thinking it's a blown fuse because I didn't touch pull on any wires. I gently took them apart.

Would you know what fuse it is and where?

Wiring is diffenitally something I can't do lol DAMN!

I'd start with those, also fuses don't tend to blow easily if the negetive battery terminal is disconnected :thumbsup

Haha yea I should have disconnected it.

Thanks though!

If I remeber right the Black/Green is your illumination... The other two are on the .pdf

When connecting the wires does (+) connect to (+)

or

am I supposed to connect (+) to (-)

Sorry for the dumb question.

(+) to (+) and (-) to (-)

Thank you.