#458, "RE: socket for unbolting stock oil pressure sensore?" In response to Reply # 0
The only one I found to work was a 1.1/16 deep impact socket. I took a brand new sensor to the local home depot, and tried all and every socket until I found one that would work. Others cam close but I felt did not grab enough of the sensor to break lose. This one fits over the whole thing and was a sinch to turn with a 3/8 drive. I did need to use a 1/2 to 3/8 reducer because the 1/2 driver is WAY to big, to fit in that tight spot. GOOD LUCK! SEE YA!!!!!!!!!!MWC
#459, "i got one at autozone for $6" In response to Reply # 1
I fought with that damn thing for hours on xmas day. Two twists with that socket, and it came out in my hand.
-DarkOne I'm so bad, i should be in detention.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
