title says it all. i did rather well.
tempurature: 92 degrees
humidity: 22

6.85 psi


11.5 psi


19 psi


i was running pretty lean, that's been fixed though. I have no idea what that dip is in the last dyno.

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

300whp, not too shabby.

whats your mods Mikey?

-MIKE-

Stroked 2.2L

je 8.8:1 (signed tops)
eagle standard length rods
clevite main/rod bearings
arp head/main studs
melling high volume oil pump
stock head (well, sorta)
crane valve springs
PT lifters/rockers
3 angle valve job
standard issue eBay turbo kit, well, not really
xspower (ssautochrome) t3/t4 57trim turbo (lasting 3 yrs and counting)
ebay copied star log manifold
ebay external vband wastegate
ebay intercooler piping custom fabed
ebay 24x12x3 bar/plate FMIC
greddy S BOV
MSD dis 2
msd coil
accel wires and BKR7E gapped to 28
stage 4 portfueler kit (stock primaries, #40 secondaries)
fluidyne radiator
FAL fans
all polyurethane mounts
EGR blockd off
3 inch exhaust
straight thru "cat"
aem uego
aem truboost
ebay EGT (suprisingly good quality)
greddy fuel press
oil press
custom ghetto fabed quad pillar pod
5 spd tranny conversion (THANK YOU 2gnt! lol)
stage 4 clutchmasters
SS clutch lines
relocated to trunk battery
--------------------------------------------------------------------------------------------------------------------------------------------
pulls were done with:
no ignition retarding
93 octane

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

congrats on hitting the 300whp mark even if the graph does do some crazy going backwards action right before hitting it

I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

Again, congrats on 300whp, thats a good achievement to get to man.

Post some pics of your hog, cant say that I have ever seen any.

-MIKE-

Stroked 2.2L

Good work, Keep it up..

97 Eclipse GS, 2.2 stroker,Gt35R,MSNS,E85 @20psi. 450hp 370tq..With issues

The huge dip after 4500RPM is likely you leaning out at peak torque. Where is the AF graph?

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

i don't think the shop has the AFR graph anymore. i'll see. it did run pretty lean on upper RPM's but that's been fixed now. at 19-20 psi, afr's are around 11.5-11, sometimes dips to 10.5

Pics and introduction:
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=92&topic_id=624&mode=full

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

i do have a question. is 400 whp possible? not daily of course, maybe daily, i'd like 350 wheel. anyway, with a tune, the correct retarding of ignition timing, is 350 safe daily? is 400 wheel possible once? just a dream i'd like to accomplish.

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

congrats man great job

just curious on how much your portfueler system costed ya? and also wondering if you did port it too

Car Status: P0140 o2 circuit number bank 1 sensor 2 Cel. Ill fix it tomorow lol.

Estimated mileage on engine: 15,xxx

Congrats man, Post some pics of your engine bay.

20 psi 11.5 is not lean. thats about where you want to be if not rich. The Dip could be a rich spot. Without the AFR gauge we cant tell for sure.


Congrats, not a bad starting point.

Terry

Congrats! I still haven't broke 300 yet.

Oh 400 is possible, I will get there soon.

-MIKE-

Stroked 2.2L

Mikey, IF Chris put the afr sniffer in the exhuast he should still have a log of it on the computer unless he deleted it. I think to make 400whp you will need some more top end work, but thats just my opinion, unless you jack the boost up more. Props on hitting 300 and just doing the swap and all. I'm going to pick that crank up from you SOON man, thanks for being patient.

At 19psi what does your timing look like? How much were you retarding it in the 4k-7k range?

Congrats man.

98 Eclipse GS Turbo
Built motor - MS2 - Holset hy35 - Zoom Stg 4 Clutch - 57.5mm TB - ARP Headstuds - Turbonetics wastegate - 3" Turbo back - FMIC - Greddy RZ BOV - Walbro 255 - 650cc Injectors - Fidanza Flywheel - Cobra calipers w/ 13" Rotors - Oil Cooler - DevilsOwn meth injection

1981 Chevy Scottsdale
1987 Nissan 300zx - Chump Car
2001 BMW 325i

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

300 is a good starting point and as you mention is a number that does leave you wanting more. Your set up will get you over 350whp, but in doing so you really should add the TB and even consider making a change to your downpipe. The somewhat abrupt bend after the flange and merge point location for the wastegate where it meets the DP can lead to a turbulent reaction- which is limiting. You may want to try adding a little more length to the plumbing off the wastegate and merging into the DP a little further down stream. Also bumping up the diameter will help in this case.
Kudos on the job well done and good luck attaining your goals!

--------------------------------------
Santiago
boosted 420a...(2.2l v8 eater)
02 WRX
95 T/A 383ci
03 Harley XL 92ci w/ NOS

Nice job.

+1 on proving the ching chong meow turbos can last a good while and produce decent numbers.

+1 for being an SC local.

Goodnight sweetheart...yes its time to go...bum bum bum bum bum...good night sweetheart yes I am one little a$$hole......bum bum bum bum....

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

good job man

Congrats dude, i can't wait till i break that 300 mark. O and also for ditching the atx, that is one mistake i plan to fix one day too, lol.

___________________________________________________________________________
13psi on a built bottom end with a stock now mtx, check mate.

Crongrats man...


I hope to hit 300whp soon...

Hahn stage 2,
s20g,
FMIC,
Built bottom end,
Slowboy stage 3 head,
272's,
Full 3'' exhaust,
Some other random stuff,
10psi Through the auto tranny ridin on 19's.
http://www.4freeimagehost.com>

just to let you know car guy, my car has now fried pistons rings, and a blown HG. This happens when combustion temps reach above thresholds and causees things to go wrong. I DID NOT have any ignition timing adjustments done, and this I DO NOT want you to experience. Don't go above 15 psi until you invest into an ignition retarding module and getting it tuned. I'll be rebuilding, but i know you don't want to.

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

Yea im just going to hang out around the 10psi range until the pnp MS comes out, Then well... You get the idea...

Hahn stage 2,
s20g,
FMIC,
Built bottom end,
Slowboy stage 3 head,
272's,
Full 3'' exhaust,
Some other random stuff,
10psi Through the auto tranny ridin on 19's.
http://www.4freeimagehost.com>

I ran 21 psi for 2 years on stock ignition......the damage is due to your tuning not your lack of ignition retard. Than again I know how to tune my shit.

nice job Spliner

Hahn stage 2,
s20g,
FMIC,
Built bottom end,
Slowboy stage 3 head,
272's,
Full 3'' exhaust,
Some other random stuff,
10psi Through the auto tranny ridin on 19's.
http://www.4freeimagehost.com>

initial pre-ignition is caused from ignition/fuel/carbon reasons. Terry, my shit was tuned to 11's AFR at full boost and was a new motor, so that rules out those two. it ran RICH if anything else. By the way, its SPILNER, BRIAN SPILNERRRR lol. going msns route. $ holding me back. car sits until then. i'm lucky the spark plugs didn't fuse to the head

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim