In reply to Manek1's injector install...It is VERY tough to get out the 2 13mm bolts holding the fuel rail in. On my 99 GS I could not find anyway to remove the bolt on the drivers side of the car, as it is down hidden in the intake. The manifold is a two piece design, all you have to do is remove the five bolts from the bottom of the intake doing so from under the car with an extension, and the manifold splits in half. You then have direct view of these bolts and you can easly remove your injectors and connectors. Clean out your manifold while your at it.....Hope this helps
Built Block / Star stage 2.9 / lots of goodies Best Time 14.1 @ 101 2.4 60' on Stock internals @ 11psi 244whp 230 torque @ 13psi Visit my hompage for pictures & mods http://members.cardomain.com/actingrezy