Now, I don't know if someone makes a prefab one of these, but I made mine from scratch. I cut the circle out of wood. Made sure it fit. Cut a groove out of the middle (for the gauge). Taped the gauge in and bondoed the sides to hold it. Laid fibreglass across it. Let it harden, sanded it. Bondo, sand, bondo, sand, primer. It is not quite done, but close. What do you think?

Brynden

Looks Good Mang, imo.

EDFDC OWNZ

Will Werk for Mods

1995 RS

Current Mods:
Cracked Front Bumper
K&N Intake
Flowmaster Muffler
Platinum +4 Plugs
MSD SuperConductor Wires
and one heavy Right Foot!!!!

**Badgers??? We don't need no stinkin' badgers!!!**

**No Shirt, No Shoes, No Dice!**

**************
Fucking Kangaroos.
**************

Damn man that is sweet. You should make them and sell em. I'll buy one.

95 eclipse RS

14.80 @ 94mph with no turbo

yeh man, i second that. Looks phat, and i'd buy one too. I'd make one if i wasnt so damn lazy. I'm still half assin the fiberglass in the hatch. Ure ride looks so fresh and so clean clean bro, good work.

amiller99rs: seriously, chicks suck sometimes
amiller99rs: like if a girl walked by and said "Hey, nice cock" and just kept going you'd smile all day about that

brynden29

whats that in the middle of your dash?

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

>brynden29
>
>whats that in the middle of your dash?


looks like a center channel speaker to me

1997 GS
Normally-aspirated and staying that way
OBX-R Type H Exshaust
OBX-R Test Pipe
AEM Long Ram CAI
Denso Spark Plugs
MSD 8.5mm Spark Plug Wires
K@N Valve Cover Breather
OBX Front Strut Tower Brace
Stillen Rear Strut Tower Brace
VIS Vented Carbon Fiber Vented Hood
Arospeed Bumper Brake Wing
Sparco Shift Knob
Koni Adjustables
Eibach Racing Pro Springs
Buschur Racing Fuel Pump Upgrade
Crower Stage 3 Racing Cams
AEM Timing Gears
Upgraded Valve Springs
Titanium Retainers
Greddy Header
Thermal Header Wrap
---Minus the back seat-----
---Minus all A/C Accessories---
---Minus all Powersteering Accessories---
No Stupid Neons
No stupid indiglo gauges
No Stupid bass system radio
No Stupid Window Pisser Lights
---If it doesn't make my car go faster or run better, it won't be on my car-----

I like it....but is it visible enough for you?

Old = 1997 Eclipse GS
New = 2005 Scion xB

Member # 2283

oops

me with A-10's Avenger Cannon- can you say depleted uranium rounds?

www.blackjupiter.com (gaming computers - tell everyone you know!)
MODS:

Engine= 60mm TB, Greddy 4-1 Headers, AEM Short Ram, MSD Wires,

all of my guages will be like taht... right in front of me, with the same line of view for each so my eyes dont have to "readjust" while viewin em.......


nice brynden.......

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

YA!!! THAT IS BAD ASS!!! I WANT ONE!!! I WILL BUY ONE, or you could tell us the process... like how much material to use, what to buy and stuff. How is the view, is it easy to read? What about hooking it up?? VERY SMART IDEA!!!

I use to have a White 99 GS Sport with a Star Stage II Ball Bearing T3/T4 turbo...it was fun untill....well those who remember me know Oh Ya...this is what I have now... a 99' GSX...

nice work Brynden...

check out my newest gauge location..

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

i was thinking about doing something like that. great idea too. props on doing it. if you make em, i'll buy one from ya. plus gets rid of that pesky tweeter that will end up cracking and stuff. what's that thing on your a-pillar though?????

Thanks for the compliments guys. It took me damn near 5 hours to make that thing. I do not think I would ever do it again. It is not that hard to do if you have any experience with bondo and fibreglass. I will try to answer the questions asked above...

It is a center channel speaker.
It is a tweeter in the A-pillar.
Yes, it is very visible. I can not see the 0 very well, but my oil pressure better not ever be on 0 or there is a problem.
The only materials I used were 1/4" MDF for the base, bondo, 2 fibreglass strips of cloth, and more bondo and time. Lots of sanding.

If you have anymore questions let me know.

Oh and that gauge is one of the bigger gauges. Not the 2 1/4, I think the 2 3/8 or something like that. So in theory the holder for a 2 1/4 gauge would be easier. Just thought you would like to know.

Brynden

Fuggin nice, man. But I wouldn't expect anything less...hell...all your shit is tight!

Thanks man. Like I said, it was not easy, but if someone wanted to pay me I might make ONE more to see if it is any easier. They would have to send me the gauge they want to use and the money to make it, and I will think about it. IM me first though.

EDIT: Oh and wiring is easy. Just run the wires up through the dash out the tweeter hole. Connect the gauge and you are done.

Brynden

That's tight man...looks way good!! I like the tails too!

'98 Talon Esi

Mods:
System:Alpine CD Deck w/ 6d Changer|2 10" C2 Precision Power Subs|Fosgate 360a2 Amp
Engine:helmut.idlegames.com/sounds/tal_cdb.mp3|Greddy 4-1 Headers|Bosch Platinum +4 Plugs|Iceman CAI
Suspension:Upper Front & Rear Strut Bars|Bridgestone Potenza RE910 Tires
Exterior:15% Tint All Around

Next Purchases:
NO MO Money

"Power is the ultimate aphrodisiac!!"

___________________________________

Hey, I've got an idea... just make a mold of the one you have or if you make another one. You could knock a TON of them out in no time at all and sell them.

Just my $.02

Hey Brynden, if you can go without it for a week or so I could make a mold of it and produce these a lot faster for people who want them.

Nice job man....very clean!

http://www.cardomain.com/ride/3130861