Welcome to the 2GNT Forum! Interested In Advertising with 2GNT?
Home | Site Background| Info&Specs| Mods & Tech Info | CAPS | Part Reviews | Donate | 2GNT Stickers |
Search Printer-friendly copy 1 User in Chat
Top 2GNT Technical Handling/Suspension topic #458
View in linear mode

Subject: "What camber kit to get?" Previous topic | Next topic
EclipsedJan-20-01 05:31 PM
Old School 2GNTer
2 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#458, "What camber kit to get?"


          

What is a good camber kit to get for our cars? and how much do they run? i have Eibach Sportlines on my car right now, and the front isnt lowered quite as much as the rear, noone else notices it, but its getting on my nerves. i want different springs that dont lower as much, what is another good brand that will take care of the "front end higher" look? thanks a lot for any help.



1997 RS
75-shot NOS(wet),JE Pistons, Crower Rods,Ported/Polished Head, Bored Throttle Body,AEM CAI,Greddy Evo Exhaust, MSD Ignition,NOS Purge Kit, NGK Plugs and Wires,Clutchmasters Stage 2
http://www.autorage.cc/
If ya want cheap prices, this is the place to call. Just give them a call, i bet you wont be disappointed! Ask for Randy and tell him Anthony from TN sent ya!

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

trickedeclipseJan-22-01 04:12 AM
Old School 2GNTer
438 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#459, "RE: What camber kit to get?"
In response to Reply # 0


          

Anthony, Before getting my coilovers, I chose the Intrax 1.75" route, and had the same problem. Front camber was off 0.9 degrees, and the rear was off about 2.50 degrees. Noone else really noticed, but it annoyed the hell out of me. I went ahead and ordered the Eibach front and rear camber kits. When I first mounted the kits, I overexagerated and actually had positive camber in the rear. Then I played around a little, and corrected the camber by eye, but now my problem is finding a shop that will truly align my car and actually use the camber kits. (My car has a hard time getting up on the alignment racks)

All in all, the problem is gone, and I don't cringe like i used to when I look at my car. (rear wheels leaning inward)


-PJ
'96 ESI-NOS Talon / '02 Subaru WRX

"Making Dreams Reality"

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
EclipsedJan-22-01 03:53 PM
Old School 2GNTer
2 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#460, "RE: What camber kit to get?"
In response to Reply # 1


          

thanks for the info man....how much did the Eibach camber correction kit cost you, front and rear? i think i may get coilovers next, so i can slam it for show, and raise it up when just driving to and from school. by the way TRICKEDECLIPSE, sweeeeeeeeeeet car!!



1997 RS
75-shot NOS(wet),JE Pistons, Crower Rods,Ported/Polished Head, Bored Throttle Body,AEM CAI,Greddy Evo Exhaust, MSD Ignition,NOS Purge Kit, NGK Plugs and Wires,Clutchmasters Stage 2
http://www.autorage.cc/
If ya want cheap prices, this is the place to call. Just give them a call, i bet you wont be disappointed! Ask for Randy and tell him Anthony from TN sent ya!

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Handling/Suspension topic #458 Previous topic | Next topic
Powered by DCForum+ Version 1.2
Copyright 1997-2003 DCScripts.com

I generated this page in 0.043698072433472 seconds, executing 12 queries.