My MS2 unit was just delivered and I have a question concerning wiring of the IAC. It will be installed for full standalone.
Does anyone know the wire mapping between the MS2 wiring (green/white, white/green, blue/white and white/blue) and the connector wiring (yellow/blue, gray/blue, orange, and gray)?
#4939, "RE: SymTech IAC Wiring" In response to Reply # 2
I can tell you what worked for mine, but you will have to wait for me to take the tape off and check. I also installed standalone, and I JUST got it to work without any flaws.
95 Eclipse GS: 10.5:1, Crower 2's and MSII 186 WHP - 150 WTQ 14.697 @ 93.85 MPH......Gone, but not forgotten 99 420A Avenger: Given to my sister 99 GS OZ: Sold 03 Evo 8: Family Car with balls
#4941, "RE: SymTech IAC Wiring" In response to Reply # 0
Originally posted by RogueAngel Does anyone know the wire mapping between the MS2 wiring (green/white, white/green, blue/white and white/blue) and the connector wiring (yellow/blue, gray/blue, orange, and gray)?
I can tell you that for a standard MS stepper motor IAC rig, the green/white wire goes to JS3, the white/green wire to JS2, the blue/white to JS1, and the white/blue to JS0. Given Corbin's information, your connection scheme should look something like this:
#4954, "RE: SymTech IAC Wiring" In response to Reply # 5
Originally posted by streetlightning mine are slightly differnt: SPR1: Grey (no label) SPR2: White/blue IAC SPR3: WHITE/green (no label) spr4: blue/white (Iac)
Is that a question? If so, you're not providing enough information; the SPR ports can be connected to anything and in any way. If you're sure they're connected to the stepper motor driver and I had to guess how, I'd say SPR4 is probably connected to JS3, while SPR3 is connected to JS2 and so forth. If that's true, your wiring scheme would look like this:
#4955, "RE: SymTech IAC Wiring" In response to Reply # 7
hi paul, i just got an email from you guys staing the same thing lol. yea i didnt know how my spr related to the jsx'S . My board was wired with stepper contol on the sprs mostlikely b/c i used all the other spots (p/h board and cam sync.) thanx