I went to the mods section on the main page, and it appears the site for it is down. for the most part i know what needs to be removed, but i would like pics, and to know how difficult it is to bleed, Dave_Fl and I are doing this on Sunday, so any and all help is appreciated it. it sounds pretty simple. just gotta be clean... Thanx Ya'll
97' Talon ESi Custom CIA AF/X UDP AF/X Solid front motor mount Apex-i Exhaust Accel Wires Royal Purple 5w-30 Oil
#497, "RE: Clutch Restrictor Mod Help..." In response to Reply # 1
Just now noticed it was written by Eric R. I'll try and get a hold of him. 97' Talon ESi Custom CIA AF/X UDP AF/X Solid front motor mount Apex-i Exhaust Accel Wires Royal Purple 5w-30 Oil
#498, "RE: Clutch Restrictor Mod Help..." In response to Reply # 2
take the banjo bolt out that bolts the line to slave unit. inside you will see the restrictor. take a piece of wire and pull the restrictor and spring out. put the bolt back in, making sure there is a copper crush washer on both sides of the banjo.
bleeding it is exactly the same as how you bleed brakes. crack open the bleeder screw while someone presses the pedal to the floor, and shut it while yoiu release the pedal.
sorry, bad day at work. 
