I noticed there is a HUGE difference in price from the dealer timing belt and water pump, compared to what you can get at parts stores such as pep-boys. are these low grade products? or is the dealer just way over priced? thanks for any help. also, other than the belt and water pump, what else should i get? thanks a lot, my uncle( a mechanic) will be doing the change.

1997 Eclipse RS
75-shot Nitrous Express(wet)
AEM CAI
Greddy EVO Exhaust
NGK Plugs&Wires(one range colder)
Front/Rear Upper Strut bars
Eibach Pro-Kit springs
Tokico Struts
17" Konig Imagines
Yokohama A520's
http://www.TeamKLR.com

1997 Silver RS
Built
T3/T4 BB Turbo
20psi
Most current 1/8th mile time: 8.1@93mph 2.015 60'
1996 Black Supra TT
2004 Silver Snake

Yes...should the timing belt be MOPAR OEM or some other brand?



l e o n

I would stick with OEM just because that's what our cars came with and timing belts are so important. Mitsu wouldn't put a cheap timing belt on or then everyone would bend their valves and cost them thousands in warranty work. At least that's what I'm hoping...

eclipse804@hotmail.com
http://importdeals.homestead.com
Import Parts and Performance

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

good point...sure hope it's worth it cause the timing belt costs quite a few pennies!



l e o n

I don't know about Mitsu not using "cheap" parts/

Look at the headgasket, man

My 2 cents

that's just poorly designed on chrysler's behalf..


l e o n

Hehe but at least they tried to improve it, with all the different versions that later came out...

eclipse804@hotmail.com
http://importdeals.homestead.com
Import Parts and Performance

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

That's good to know after my gasket popped like a zit on a 15 year old. Good to know that I've still got my sense of humor about it.

I'm using a Goodyear GatorBack belt... At the advice of my shop... they say this is the best I can get.. also good because it has a warranty.

FS: 2.5" Test Pipe 25 shipped

>I'm using a Goodyear GatorBack belt... At the advice of my
>shop... they say this is the best I can get.. also good
>because it has a warranty.


yeah thats what i got, they are just as good as OEM. and they are only $40 or $45 at autozone.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

Yup, Goodyear Gatorback belt, $40, MUCH better quality than OEM.

________________________________________________________________________________________
Car Sold

http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

Yup Gatorback going on when my head gets back from the machine shop.

And it's a chrysler belt not a mitsu. Pretty much all engine parts are chrysler. As for who made the belt for Chrysler... that I don't know.



15.9 @ 86.7mph

Injen CAI, 55mm TB, P&P Intake, Crower Cams, Hooker Header, ERT/Catco Cat, GS-T Muffler, AFX UDP, Crane Ign Amp, S-AFC

Go gator back, they are sssssssssssooooooooo much better than stock. Get them for your acc. and alt. belt too, very high quality stuff.

I edited to the wiki!

>Yup, Goodyear Gatorback belt, $40, MUCH better quality than
>OEM.

What does the OEM go for, just curious? I too am going to have mine done, 60k around the corner..


http://www.cardomain.com/id/jasvbts2k2
"The ONLY Honda I'd mod would be ASIMO"

DAMN! old thread alert! haha.

www.TeamKLR.com
1997 Silver RS
Wiseco 10.5 Pistons
Eagle Rods
T3/T4 Turbo
Custom FMIC
Greddy Exhaust
440's

The Gatorback is already on my new engine.

Just a little FYI, it's part # 40246. Autozone has em as well as Goodyear.

when i had my T belt done the OEM belt was $95.

http://www.ocaddict.com

thanks beefgg for the sig