Does anyone know what the temperature range for the headers of our engines?
I need to get some paint for it, and I found some brake caliper paint-yellow. And it is good for 900 degrees...?
You think it will withstand the heat?
Thanks for the input
MIke

Brake caliper paint is for brake calipers - get some high heat engine paint - in the paint department of all major parts stores. That brake caliper paint will burn off instantly. Look at the turbo guys posts and you will see they are getting EGT numbers of about 1300 degress - so if I had to guess - right there, maybe a littler lower or higher because you are not turbo.

2003 VW GTI 1.8t.. I used to have a 95 Eclipse but well...water sucks.

ha ha, not even close. The highest temp paint I've seen is 1200 degrees, give that a shot, so it may bubble off too, or you may be fine. If you could find a 1500 or 1600 you'd be set. let us know how it goes.

"To strive to seek to find... and not to yield."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI w/ K&N Breather filters, 55mm TB, FU/RU/RL STBs, Red silicone hose kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs

And in my Room: Rear disc brake conversion kit, SS Brake Lines, GS-T Muffler, Intake manifold 4 porting, Energy Suspension Motor Mount Inserts. RRE FL Tie Bar(Well Almost), TSW Blade 17x7.5 (need tires)

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

there is actually header paint you should use. it has some ceramic shit in it so it resists/disapates heat better. i dont think it comes in yellow but ive seen it in aluminum, blue, and black. you can get it at advanced auto or any chain store like that.

aem cai
pacesetter headers
gs-t exhaust
red altezzas
rims, tires, and a bunch of other little stuff....that list is way too short....more will come!

-jason

this came off the digest:


Date: Fri, 27 Apr 2001 22:02:41 -0600
From: Tim Tate <tatet@erols.com>
Subject: THE Paint for High Temperatures
Message-ID: <#6>

THURMALOX... Check it out at www.dampney.com

I have run it on my heat shield, exhaust and brake calipers for over a year...
Still looks great so its not marketing hype! Comes in spray can.

Thurmalox industrial heat resistant coatings offer:
~ heat resistance to 2000F (1079C)
~ ability to withstand severe thermal cycling without fracturing
~ color stability to 1000F (538C) with peaks to 1200F (648C)
~ ease of application (Comes in a spray can)
~ quick dry times - no complex heat cure cycle
~ single package or primer/topcoat systems
~ high build, self priming systems
~ proven VOC-compliant formulations
Some Thurmalox coating can be applied directly to hot steel operating at
temperatures up to 500F (260). Others protect
thermally insulated stainless steel from chloride induced external stress
corrosion cracking. Also available are temperature indicating systems that show
changes in the exterior surface temperatures of steel, as well as heat and
chemical resistant caulking compounds.

Tim Tate, Member Advisor Officer
Capital Area DSM Club, Inc.
93 Talon Tsi AWD (VA Plate DSM CLUB)

>Also available are temperature indicating systems that show
>changes in the exterior surface temperatures of steel

Now that would be sweet .. paint that changes color depending on how hot the surface temp is.. Love to have some of that on my turbine housing..

______________________________________
-Dino Yancey
I'm so bad, i should be in detention.


Get the Mitsubishi Technical Information manual for the 95-99 Eclipse HERE!
http://www.heavenz-not-0verflowing.com/files/dsmmanual.pdf

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

Where did you get the stuff from? I tried there website and it doesnt say you can buy it in stores. So I am assuming u have to go thru them.
Mike

LAST EDITED ON 02-May-01 AT 09:18 PM (PST)

if i felt like dealing with a possible leaky exhaust gasket i would be on that....i would have to take my headers off to paint them.

aem cai
pacesetter headers
gs-t exhaust
red altezzas
rims, tires, and a bunch of other little stuff....that list is way too short....more will come!

-jason