I did some searching, and didnt see what i was looking for. Im running into an issue where i dont have room for my turbo to be clocked where id like it for ic piping. One solution would be a 1/2 size radiator. So the question is, is any one running one, if so any over heating probs? This will be on a 2.4 as well. Thx.

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

Just slap Bullett in the face why don't you.

He took the time to create a wiki page for it.

Search dude.

http://www.2gnt.com/?d=Honda_1/2_radiator_Install

---

2012 2500HD LML

Thanks. I did, but i didnt search the wiki, as i really didnt think it was a popular enuf mod to wiki. I see that it works per the wiki, given that, im wondering if any turbo guys running it have seen and disadvantages/issues with running it on a turbo setup, esp a 2.4. I will have to search for a 1/2 rad and get some dimensions to even see if it will be my solution.

thanks.

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid

I've run this mod on my turbo 420a, multiple NA set-ups and 4G63 set-ups. The Honda guys do this quite a bit with no overheating problems.

I guess the question is, will it free up enough space for your set-up?

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

sweet! indeed that is the question. ill be looking into a few options for the 1/2s and taking some measurements. if i can i can do like a 120* out of the comp housing and and snake it most likely... but this gives me a good option. its this or option 3 in my other post.

http://forums.2gnt.com/dcboard.php?az=set_linear_mode&forum=8&page=&topic_id=109262&prev_page=show_topic

however, my pusher fan is like a 10" i belive, i cannot fit a larger one, so im wondering if the cfm its pushing will be sufficient..

you can always trust a dishonest man to be dishonest, honestly, its the honest ones you need to look out for. you never know when they will do something..stupid