I putting a SS line together to go from Master to Slave.
I was wondering if, i should use 3 or 4an line?
I'm thinking 4an will make the clutch pressure to soft.
Any input on this idea??

97 Eclipse GS, 2.2 stroker,Gt35R,MSNS,E85 @20psi. 450hp 370tq..With issues

-4 might be fine, and it wont change the pedal feel much. remember that its a closed system

only concern would be space and making the larger line fit
also make sure you can get the correct flares for the cylinders, as i would bet money they are SAE 45* flares and not AN 37*

______________________________________
______________________________________
"Don't fear the weapon, fear the soul of the warrior using it."
"My CEL only goes off when i remove my battery."

Best sum up of working on a 2GNT
DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."


Ahhhh Priceless . . .
eclipse982nrRST "its actually lightish red"
RoninEclipse2G "yeah, they already have a color for that... it's called PINK"

Thanks will give 4-an a try..

97 Eclipse GS, 2.2 stroker,Gt35R,MSNS,E85 @20psi. 450hp 370tq..With issues

Agreed. I used to work work with large scale hydraulics and I doubt you'll feel any difference between a 3 and 4 over that distance.