I did a search and couldn't find anything. I have a manual tranny. i did some work on it, Now i have to put the bellhousing back on. I need to know what sealant to use and how much to torque the bolts down.

click on the link in my sig, look for the one that says 2gnt_2g_mt_overhaul.pdf, it should tell you all you need to know.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

It's red loctite. MAKE SURE you don't mess up when putting it back together and the loctite isn't able to completely seal because you WILL have a leak afterwords.



________________________________________________________________________________________
Car Sold


http://hometown.aol.com/ohshootuhh/
www.Fast420A.com

anearobic gasket maker. don't know if that what red loctite is, but i used the anearobic gasket maker the second time and it hasn't leaked at all.

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

"red loctite" in this context probably means Loctite 518 (or 51817) which is an anaerobic sealant that's very expensive and hard to find but good. I picked up a huge tube from Toyota for $40. A 5ml starter tube like the one below should be enough for the tranny, that's usually $8-15.

Yeah, What he said, NAPA will have it behind the counter, they never have it in the isles when I go.

$40 holy crap, if I what I think this stuff is I found a big tube for 14 dollars at winchester auto. I guess that wasn't expensive then hehe....

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

Originally posted by thedawg
"red loctite" in this context probably means Loctite 518 (or 51817) which is an anaerobic sealant that's very expensive and hard to find but good. I picked up a huge tube from Toyota for $40. A 5ml starter tube like the one below should be enough for the tranny, that's usually $8-15.

-----------
'96 Eclipse GS
'94 Talon TSi AWD
www.SOVADSM.com

All gone now. Too bad, so sad.

you dont need to seal the bellhousing. You wont be able to getit back apart later if you use lock tite you will crack some thinf pring on it

NO Anarobic sealer or anyother gastket makers is different from the thread locking compound your thinking of. Anarobic sealer stays in its jelly like form till it is completely absent of air in its environment and only paper thin ( if that).

IT IS LOCTITE 518 or equivalent. Same stuff as on your block, cam seals etc.

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

thank you for confirming, it's greatly appreciated!

-----------
'96 Eclipse GS
'94 Talon TSi AWD
www.SOVADSM.com

All gone now. Too bad, so sad.

I would use hondabond. I used it for my honda case, get it from the dealer.