#1023, "need help gatering parts for upgrading drivetrain stuff, pics..."
so far i have the clutch disk, a funky bearing (it's this metal thing about the size of a mouse for a computer), a pressure plate, the new skool racing LSD, and the picture of what's below. the clutch disk is motofool's stage 4 disk with some type of pressure plate. i'm still waiting on the fidanza flywheel to come... argh.
i'm trying to get together all the stuff that i'll need to install the thing. in that picture i have 3 quarts of the Mopar NV-T350 transmission fluid, 6 '95 Neon flywheel to pressure plate bolts, and the diff pin brackets so my pin won't slide out after i put in the LSD.
i need an alingment tool, right? the stealership wouldn't sell me one. i'm guessing i can just rent one or something at autozone?
do i need any other parts? right now i have the stock modular clutch. how will the non-modular fidanza connect to the stock starter plate? do i use the stock bolts?
will i need any new bearings? if so, which ones? when i did my shortblock installation in february i remember inspecting the throw-out bearing (that's the thing that goes inbetween the fork and the pressure plate, right?) and it looked fine to me.
lastly, i know that some people have had issues with clutches that engage very high on the pedal. i read the thread about putting washers inbetween the slave cylinder and the bellhousing, but how many do i use and how thick should they be?
thanks for the help guys. i'm sure The1Bill and i will have a wonderful time getting the non-modular clutch in...
#1025, "RE: need help gatering parts for upgrading drivetrain stuff, pics..." In response to Reply # 0
Hey sorry i can't answer any of your questions. I'm am reading up on this right now also. How much did that clutch disk from motofool cost you? Does it just go into the stock clutch housing?
____________________________________________________ four nails four corners four riders and four horses
#1027, "RE: need help gatering parts for upgrading drivetrain stuff, pics..." In response to Reply # 1
it was $770 shipped for the stage 4 non-modular ceramic 6 puck disk, a new pressure plate, a funky bearing, and a fidanza flywheel which hasn't come yet.
the pressure plate, clutch disk, and funky bearing are all here. nothing looks damaged or fubar, however the funky bearing isn't 100% centered... i don't know if i should return it or not. pics to follow.
