#120324, "FS:Supercharger part out, megasquirt, built head, 60mm tb, Turbo" Jan-27-12 06:53 AM by junkyarddsm
Well here I go lost all interest in the eclipse and the project so selling all the parts. I have over 4,000 in parts and need them gone. I will have pictures up very soon (tonight).
Fully built head- $1500 shipped paypal everything It has -std. ss ferra valves (new and laped in head). -Supertech Ti duel springs and retainers (new and installed). -Mopar Lifters 2.4 turbo (New, primed, installed) -Mopar Rockers 2.7 (New, primed, installed) -Crane 12 n/a grinds (new and installed) -Aem cam gears (new and installed). -Full street port and polish on the head. -Resurfesed, preasher checked whole 9 yards. -Felpro valve steam seals. (new and installed) I think that is it for the head Everything is new and installed with 0 miles on it built the head and realized I am not going to finish the projected due to leaving the marine corp. I was never installed on a motor or even ran for one second. I have put a lot of money in this head parts and time really it will be a bolt on afair for who ever buys it. I will also include the valve spring installer that I bought off red90sev. WILL NOT PART OUT AT ALL DO NOT ASK I WILL BLOW YOU OFF!
M90 ford thunderbird supercharger new never used just sat for the last 6 months. It is teflon coated on the roats and casing. -$300 shipped paypal everything.
Gready RZ bov New never used in box. -$150 shipped paypal everything
Tial W/g 38mm New never used still in box with fittings. - $300 shipped paypal everything
Non-cruise control throttle cable New never used still in box. -$50 shipped paypal everything
Spearco intercooler used and a little modified. Holds boost no leaks great shape. -$125 shipped paypal everything.
CXRacing intercooler piping - 4 18'' L pipes - 2 18'' U pipes - 1 18'' striaght pipe - 14 tbolt clamps - 7 blue silicon couplers New never installed still wrapped.-$90 shipped paypal everything
Megasquirt 2 - V3.0 board - Fan contral - 6 ft mega harness - Inivative wideband with o2 sensor and controller - custom wire tuck conecter. - Air temp sensor New never used with pig tail. - Water temp sensor New never used with pig tail. I bought this less then a week ago Everything was tested and was showen on a running can. It has a very nice setup to make it apear to be a stock connection. Great setup and has fan switch control. -$500 shipped paypal everything.
Custom intake manifold. I is made out of high grade aluminum and has been drilled and tapped for all stock sensors and fitting. It is not drilled and tapped for the extra air temp sensor but I can do that if you want. Also comes with the 60mm throttle body and spacer. -$300 shipped paypal everything
RMR custom billet aluminum -6 fuel rail with ford red tops and fittings. Rail has 0 miles and injectors have 30,000 miles on them. Comes with wire harness and pig tail. -$150 shipped paypal everything
DC sports front stut tower bar mounted and taken back off. -$125 shipped paypal everything.
Have more parts will post later with the pictures. I am pretty firm on all my prices may move a little bit if you are real. I really wanted to finish this but im to much into it and tired of looking at all the parts that I will never use. So please feel free to email, pm, or call me (402-230-0451). If you have any questions post them to the thread. If you think my prices are high let me know but really I know I will take a loss but I can sit on this stuff.
Finish? What is this "finish" you speak of sir? Dsm's are never complete just temporarily put together.
97 eclipse gone but never forgotten Ill miss you money pit.
#120326, "RE: FS:Supercharger part out, megasquirt, built head, 60mm tb, Turbo" In response to Reply # 0
Hate to see that you are abondining your project. May grab the strust bar and possibly MS if you still have by my next commision check, unless some how taxes get here quicker,
97 Talon ESi 14.943@91.35MPH N/A! "If you need someone to provide an itemized build of materials and a flowchart to walk you through every build-related question you will need to answer at each step of the process, you shouldn't be playing with cars. "-Driggs
#120330, "RE: FS:Supercharger part out, megasquirt, built head, 60mm tb, Turbo" In response to Reply # 1
Pictures of the intake manifold please. Also, would you seperate the 60mm from it? If nothing else, i'll probably just buy the TB if money doesn't allow me to buy the whole setup.
#120332, "RE: FS:Supercharger part out, megasquirt, built head, 60mm tb, Turbo" In response to Reply # 0
Uploaded pictures of the intake and strut tower bar. I will have more pictures to come because I am working late right now. Also to add if you want everything give me a price I may just take. I found a box full of more part this morning that I forgot about so keep watching you will see tons of good stuff.
Finish? What is this "finish" you speak of sir? Dsm's are never complete just temporarily put together.
97 eclipse gone but never forgotten Ill miss you money pit.
97 Talon ESi 14.943@91.35MPH N/A!
