#109715, "RE: Wastegate and Boost Pressure" In response to In response to 3
Originally posted by Corbin Is it possible that someone sold you the wrong spring? Were they different in size or color? I know the springs for my Tial wastegate have a little paint on them to identify the rating. The 1 Bar spring and 0.6 Bar spring are both blue. The 1 Bar one is larger though. You are correct that the upper port is only for the electronic boost controller. You can expect the wastegate to open partially before you hit its rated boost pressure. Every psi of boost tries to compress the spring further and open the valve further. It should hit a happy place and maintain boost pressure around its rating. Don't expect it to be dead-on though. You need a boost controller to really dial it in and minimize early opening. Corbin '95 ESI-T Now with more power and fewer leaks Humble servant of the Wiki
After more driving and testing it looks like it is not the wastegate. I am definitely leaking boost right around the 5-8 psi range. I am going to check everything else out for leaks but I suspect it is the blow off valve.
I have a greddy type RS. I believe I only have the lightest spring in the BOV. I am going to find the other spring and see if that will keep it closed. I tightened it all the way to the "hard" side and it still leaked at about 7PSI and also fluttered.