The #74 LED's are for the bulbs behind the Instrument Cluster(speedo/tach area). The bulbs behind the HVAC, A/C, Cruise, Cigarette lighter are all smaller than #74 and i don't know what size. You are just goint to have to use the LED's you get from radio shack and do pretty much the same thing you did with the HVAC.
i did this and instead of soldering the resistor onto the green wire, i just put it right on the circuit-board. I did have to cut part of the "legs" of the LED and the resistor.
The defroster button was a little harder, but i also soldered the LED and the resistor to the circuit board.
Now i just need to change the cigaretter lighter and Cruise control area.