#27441, "RE: desperate need for advice: New brake pads too thick, CAN'T FIT" In response to In response to 0 Jun-30-05 10:51 AM by 420a-Tnthewerks
You have to take like a c-clamp and clamp the piston down until it's all the way down.
edit- if that makes any sense.
c-clamp:
You'll see a round cylinder(piston) on the inside of the caliper where the pad goes. Put the c clamp over it and the caliper. Start tighting the c clamp until the piston is all the way down.