youve got a few options. first off though,did you touch the bulb with your hands? if so theres your problem. anyway, you have 3 options. 1 - the easiest but riskiest - use a coathanger with some tape wrapped around it backwards and try to stick the tape on the glass, but you run the risk of scratching the headlight 2 - easier but requires some time - take out the headlight and bulbs fill the light with water then let it drain out the hole, but you will have to allow at least a day and a few minutes with a hairdryer to evaporate all the water - this is safe, i have done it. 3 - the hard way, seperate the lens from the housing as if you were gonna clear the turn signals. and you can clear the turn signals while you have it apart if you want to. if you need info on how to do this i can help you as can a few others on this board who have cleared their lights http://www.geocities.com/blue2gnt