OK ok... I have done everything correctly to my knowledge on this, but its wrong. I retarded the CAS 90 deg and I swapped wires 1 and 3 going to coil. I timed the block at cylinder 2 at TDC and the head as you would on the 2.0.

One thing is the cam gears are of course reversed pointing the 2.4 side out. I thought I had messed up because I timed them as you would for the 2.4, and it wouldn't crank... duh since the 2.0 side would be completely backwards. Ok now I timed them the complete opposite of what I had as the 2.0 head should be. Ok still no dice.

As it sits right now its timed on cylinder 2 at TDC with the head timed as it would be for the 2.0. When you try and crank it, its completely ass backwards sucking through the exhaust mani and blowing out through the intake.

Any ideas as to what in the hell is going on. I am so pissed with this right now I feel physically nauseous.

Thanks in Advance with any replies.

~EDIT~ I also did the injector rewiring sending 1-2 2-3 3-4 and 4-1