Did you check the "reman" head before you put it on?

If you are 20psi across the board it sounds more install than anything. If it is varying and you got say 20 in one and 150 in another then obviously check that cylinder.

If it is 20 in one cylinder, I wouldn't bother with a leak down. Just put some air in there and you will be able to hear if it is going intake, exhaust or into the block, lol.

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm