I did a a/t to m/t swap to a 99 gs. Followed all the instructions via corbin's writeup. Currently, it will not crank at all. Cant even hear the solenoid on the starter. I wired in the clutch safety switch exactly as the write up said but still no start. I couldn't get the starter to work even if i grounded it directly to the battery even though in a bench test it worked. Any ideas any of you could have me look into so i figure this out would be great. I don't know if it matters, but i used a 98 ecu in the swap, couldn't find a 99 manual one and this one plugged in.