Originally posted by WIDECLIPSE The bleeder is on the slave cylinder.
The slave is located on the front of the transmission bell housing. It's about the size of a fatty marker and has a single hard line coming off of one end. The other end will have a rubber boot and be pointing to a black nub that comes out of the transmission (the end of the clutch fork). The bleeder is a small, shiny metal nubbin that sticks out the side. If you're lucky, the rubber cap is still on it. Hope this helps. Bleeding it is a good idea, but grab a flashlight and look up under the dash behind the pedals. A new master cylinder is less than $40 from Napa, if you need one. A new slave is less than $20. And they have rebuild kits for even less than that for both. Be sure all you need is a bleed before wasting time with this.
Thank you for your help. I looked last night and did not see any fluid. I could not locate the other cylinder so I have not checked that yet. I will check this before I go to work tonight.
What is the cylinder that is to the right of the brake fluid tank? It is really tiny and I thought this was the master cylinder.
