#108751, "First time on the dyno 297 hp / 270 ft lbs "
I'll start out with a little background info on my car.
95 Eclipse GS Turbonetics t3 super 60 Treadstone manifold 3" downpipe 4" catback Portfueler with 480cc injectors JE 8.8 pistons Eagle rods Melling oil pump Pt lifters/rockers ARP head and main studs MLS headgasket 3.55 trans with OBX lsd Spec stage 5+ clutch
Stock ignition Stock intake manifold and throttle body Stock cams
15psi on 93 octane
I bought the car 6 years ago and have been slowly building it ever since. The car has NEVER been to a mechanic. I do all my own work. I did all the tuning with the portfueler myself as well.
Finally took it to the dyno yesterday and was pleasantly surprised!
297 horsepower 270 ft lbs torque
It was close to 90 degrees and humid. With a little more tuning, 300 hp will be no problem!
#108754, "RE: First time on the dyno 297 hp / 270 ft lbs " In response to Reply # 2
congrats but wtf, same setup as me, yet took me 21 psi to hit 300whp. if you can hit that at 15psi, then im sure i can. ohhhh zacharyyyyy! where izzz youuu
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#108756, "RE: First time on the dyno 297 hp / 270 ft lbs " In response to Reply # 3
What do you want from me? Not too shabby of numbers congrats! Mikey, your car had issues, this is what normal cars make on about 15psi(as far as a 2gnt anyway). Get some spark control on that bitch and up the boost!