#23439, "Poll question: $15 camber kit, how many washers did you use??"
i have eibach sportlines and 18's i added 3 but i'm waitin on my shocks (illuminas) so while i have everything i apart i wanted to check to see what took care of everyone elses camber issues.
#23442, "RE: $15 camber kit, how many washers did you use??" In response to Reply # 0
i used the thinner "fender washers" on mine, so it's actually at 7 right now and could use a lil more... we'll see how i feel about bringing the brackets out much further, once my tires wear a bit.
#23445, "RE: $15 camber kit, how many washers did you use??" In response to Reply # 2
5 on prokits. You can't get away with sportlines on the 15 dollar mod though.
-------jezreel 1998 GS with hrc stage 2, sfmu, ml, prokits, egt, boost gauge, apexi tt, haydans tranny cooler, costum dp, dr. uber groundwires, dynotune fp gauge. gst muff, turbo spoiler Boostin since Aug 03.
nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!! thanks for www.kaptainmyke.com for the sig hosting
#23455, "RE: $15 camber kit, how many washers did you use??" In response to Reply # 6
so you guys are tellin me i'm f****ed?? or what?? i still have a bunch of washers from that ingalls kit. could i use a level won't i get the tires mounted?? and see if i'm close i mean i ran 18's kumos 712s on stock shocks with the sportlines for about 20k and the tires didn't get bad till about 17k...
#23464, "RE: $15 camber kit, how many washers did you use??" In response to Reply # 6 Apr-11-04 11:15 AM by willmayo
Originally posted by BuckNutty can you use the $15 camber mod on gold lines...eh....i assume not
i did. dont really know how much it helped, maybe i'll throw it on the alignment rack tomorrow and let you know. but as far as tire wear its nothing noticable yet, and from a glance the camber doesnt look bad. from what i remember from the last time i threw it on the rack the camber was within spec.
edit: i used 5 washers btw
-------------------- 99 GS-Turbo 3.55 MTX S16G @ ~15psi - FMIC - Forged Internals Clinton Township, MI
#23505, "RE: $15 camber kit, how many washers did you use??" In response to Reply # 8
One thing some of you guys fail to mention is the thickness of the washers you are using. I pulled my RRE rear camber kit last night and measured the thickness of the bushing.
It is around 3.975mm
RRE claims their set up is good for +2 degrees.
So I am going to say pusing the arm out 3.975mm = 2* correction.
(9 votes)
