I recommend that you buy a kit if you are not really sure what
you are doing in building a turbo kit, i'll be much easier that way..

Here is what my kit consists of:

t3 turbo
internal wastegate
Revhard turbo manifold
Turbonetics bov
starion intercooler (modded)
vortech fmu (10:1)
hypertech inline fuel pump
2.25" rubber hose from NAPA part# 029789302675 (to connect ic pipes)
steel braided fuel lines (not necessary)
steel braided oil pressure line
oil return line to oil pan (pan needs to be tapped)
U-Bends / J-Bends (mandrel bent) from jegs (for ic piping / downpipe)
couple of checkvalves for the map sensor
at least 5 feet of vacuum line

Okay i guess thats pretty much it !

-= RS Turbo=-