| Go back to previous topic | |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | Going from billet HRC FPR to the SFMU. |
| Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=28569 |
|
28569, Going from billet HRC FPR to the SFMU. Posted by RoboTechDSM, Dec-31-69 06:00 PM I got the newer billet HRC FPR. What other fittings will I need?? I understand that the bleed valve are the same size. Gonna install it this coming Tuesday, thanks. | |
|
28570, RE: Going from billet HRC FPR to the SFMU. Posted by Corbin, Dec-31-69 06:00 PM Basically, you will need two -06 AN male o-ringed to NPT fittings. Once you get it to NPT, you can buy elbows and barbed fittings at your local auto stores. The AN fittings will have to be ordered from Summit or Jegs (or local shop). Aeroquip and Earl's make AN fittings. Finding a place to put the S-FMU may be difficult as it is rather large. | |
|
28571, RE: Going from billet HRC FPR to the SFMU. Posted by RoboTechDSM, Dec-31-69 06:00 PM Cool, thanks Corbin. Hopefully, the local speed shop here has them. I'm hoping to put this thing in by Tuesday. | |
