LAST EDITED ON 11-Dec-00 AT 06:57 PM (PST)

I bought the stge 1 turbo kit from HRC. I have a FMIC ready to be installed.

I haven't had any real problems to speak of. Certainly nothing that harms the car. I had to straighten my fuel mapper a couple of times after the install, but I resolved it myself once I learned that the piece required a "strong" connection by WRAPPING the fuel mapper wires around the map sensor wires at least 3 or 4 times.

I have had my setup in for about 5500 miles.

I decided not to go with the HRC inline fuel pump and opted for the widely used walbro 255lph-HP model.

I have a westach EGT and an intellitronix a/f meter. I want a jumptronix one badly. I also have an obd-2 datalogger which monitors many sensors including both of the O2 sensors.

The rest of my mods can be obtained from my site below.

Jason
98' Eagle Talon ESi-T
Mitsu Super 16g Turbo(HRC)


http://springfielddsm.homestead.com/JasonsPics.html