Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectRE: Misfire at high boost
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=108534&mesg_id=108538
108538, RE: Misfire at high boost
Posted by 420agreenvilleSC, Dec-31-69 06:00 PM
Originally posted by bullettdsm
Originally posted by SilvrEclips Im still on the stock coil pack maybe thats not strong enough at this power level. The car is pushing a little over 400bhp.
Curious. I lost the stock coil pack (and the MSD coil pack) at a little over 500whp at 24lbs on a bw366 with 10.5 comp (as I recollect). I ended up using the Screamin' Deamon coil for another 5lbs to 567whp. My plug gap at that time was .018. So it is possible, but it seems a little low for a power threshold. Maybe the coil is getting weak? I take it you're running a 3 bar. It is possible that she is malfuntioning. I did have a 3 bar that would only go to the mid 20's.


yea, after what bullett said, don't go to .015 as i said earlier. start at .018 if .020 doesnt do it. small steps.
I generated this page in 0.0077240467071533 seconds, executing 6 queries.