Go back to previous topic
Forum nameTurbo/Nitrous Tech
Topic subjectloss of boost
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=108469
108469, loss of boost
Posted by hernando, Dec-31-69 06:00 PM
I was driving my 98 RS-T yesterday and when entering the freeway i was speeding up to get with traffic. Before i even got onto the freeway my car was spooling up and the whine of boost was high(was @ 6500rpm). Then all of a sudden i heard a huge PFFFFFFT!! total loss of boost....embarassing. I pulled over and saw the piping directly coming out of the turbo to the piping of the inlet side of the intercooler came loose. It's a 2 1/2 inch C hose that came off from both ends. I took off the airfilter to get to it and re-attached it and put everything back together. HOWEVER now that I try to spool up the turbo it doesn't sound like before and it doesn't kick as much either. feels stock now :(
108470, RE: loss of boost
Posted by CODE4, Dec-31-69 06:00 PM
Do a boost leak test.
108471, RE: loss of boost
Posted by DarkOne, Dec-31-69 06:00 PM
Boost leak somewhere.
108472, RE: loss of boost
Posted by 420agreenvilleSC, Dec-31-69 06:00 PM
yea, prolly busted something else off somewhere else that you don't know of. find the pressure leak
108487, RE: loss of boost
Posted by bullettdsm, Dec-31-69 06:00 PM
Originally posted by CODE4
Do a boost leak test.

Originally posted by DarkOne
Boost leak somewhere.

Originally posted by 420agreenvilleSC
yea, prolly busted something else off somewhere else that you don't know of. find the pressure leak


Nope, you're block's cracked :P





Classic signs of a coupler being blown off. Hell use yours hands and eyes before you do a BLT. You'll probably see where the coupler isn't attached.



108491, RE: loss of boost
Posted by hernando, Dec-31-69 06:00 PM
turned out to be the delta waste gate...exhaust leak. bolts become undone with too much boost??
108492, RE: loss of boost
Posted by DarkOne, Dec-31-69 06:00 PM
Originally posted by hernando
turned out to be the delta waste gate...exhaust leak. bolts become undone with too much boost??


Mine would occasionally spit out after several months of use. I ended up using some studs, lock washers, and the highest-temp loctite I could find.
I generated this page in 0.0089309215545654 seconds, executing 7 queries.