Ok so I put a rod through my block. So now I have 2 put a new motor in my car.

Well I have every thing 2 turbo the car, I have a 60mm jeep tb, 450 cc injectors, and a new (well used block 2 rebuild).

Now I know that u can't have cheap and good its 1 or the other.

Here's waht I was thinking. Use the original crank. Get wiseco 8.8:1 pistons and eagle rods. Get a crower turbo grind cam. And the obivious bearings and gaskets. But here's my ? Should I completly redo the head ( valves, springs, lifters, rockers) or will it b ok 2 just do the cams? I'm kinda on a limited budget. But if I have 2 wait a little while longer to do it right I will.