i want to see some of your engine bay pics.... ok, ill start...

here is mine....


MiztahfooLish...'95 RS

-front & rear strut tower bars-17"x7.5" Rota Subzero Gun Metallic Wheels-245/45/17 Kumho Ecsta 711 Tires-MatrixGR Motorsports Short Ram Intake-OBX-R Dual DTM Exhaust-Blitz front & rear end-97-99 body conversion-

here is a shot of onna mine...

bigger sig pic



Pic of when i did the piston swaping of the cracked piston a few months ago.. what a mess :)

my new and improved engine bay pic.

mine:


later

what header is that ^?

^^Thats the stock header without the heatsheild on it. Looks good Shuwa29. You cleaned it up really well.

Here's mine:

damn you all have some clean bays. mine is all rusty and crap its going to take forever to get it looking good for shows. but anyways

kinda far away, but you get the gist of it.

This one is old though, I need to take an updated one.....

I had this pointed out in a PM- my strut bar is backwards from everyone else's. :P

Here's mine.





http://www.cardomain.com/id/jasvbts2k2

>I had this pointed out in a PM- my strut bar is backwards
>from everyone else's. :P

I had mine on the normal way too, and it was hard to get to the oil cap, so I turned it around and I thought it was fine until someone told me it was on backwards and I looked at the hood and it was pushed up on the passenger side...might want to check and make sure yours isn't 9D9.

'98 Talon Esi
Apex'i N1 Catback Exhaust|Greddy 4-1 Header|Bosch Platinum +4 Plugs|Iceman CAI|Upper Front & Rear Strut Bars|

I'm pretty sure my hood is fine.

can't edit after 60. DOH. here's a bump and a close-up of my VC.

Shuwa29, What the hell are those things next to your fuse box.





.

air horns i believe

where do ya guys get the steel braded or whatever upper radiator hose.
later
"Z"

BEFORE BODY AND PAINT JOB

>where do ya guys get the steel braded or whatever upper
>radiator hose.

i got mine at autozone, its made by Spectre. i wouldn't recomend it though its a pain in the ass to get it on and it doesn't look all that great upclose.
hey
Jasvb TS2K2, where did you get yours, its the shit.

before


after

Here is the beast...

Jasvb TS2K2

Is that the pacesetter rad. hose? Have you noticed any difference since you've had it on? Do you have to cover it cause of the turbo or do you drive it like that?



.

Here is my 420A with a Star Performance Ball Bearing T3/T4...



And here is my 4G63....

>
>And here is my 4G63....
>

your car is bad ass. its my favorite 2g eclipse.

>
>Jasvb TS2K2
>
>Is that the pacesetter rad. hose? Have you noticed any
>difference since you've had it on? Do you have to cover it
>cause of the turbo or do you drive it like that?


I do have the Pacesetter Radd Hozz as it was called. My understanding it's discontinued now. But I've had it for like 2 years now. Just recently since I went turbo has the heat affect the end couplings and it's leaking, so the use of some deflection is recommended. It has two screws to tighen per end put mine have stripped the clamps inside so that's how it leaks but aside from that it shines, my temps are about 190-200F average.

BTW - No 4G63 pics allowed in this thread...hehe :P


http://www.cardomain.com/id/jasvbts2k2

there are actualy 2 pics of 4g63's incase you did not notice :) one just is kinda missing a front end and the head lol anyways I want a rad hose kinda like shuwa29's any ideas on price place to buy?

juggalo... Thanks!!! :-)

the old bish





and the motor that owns all you 2gnt boys.. hence the word NT
soon to be turboed b18c1

ha evan nobody wants to see ur pos

why are you jealous? ahhahahah my pos owns woot

mine, nothing special

My old GS:




My current 91 Talon:

I need to clean it up a bit, but you guys get the idea