Hi,

I have a 1995 eclipse 420a 5 speed I have bought and was hoping somebody might have a picture diagram of what the harness should look like. I'd post pictures of what I have but i dare not incase there are children present....yea its that nasty. I tried to search the forums with no prevail. Even if there is a link to a place that has a link that might take me to somewhere with one....i need help


Thanks in advance,

What harness? What part of the harness? Your question is extremely vague and your unwillingness to post a picture is not going to get you any help.

well its the wiring harness under the dash that is my main worries. ive removed close to 30 yards of wires put in that he had connected but removed whatever it was conected to. I have this picture and will try to get more. Only dash gauge that is working so happens to be my tach. The lights in the dash work just not the needles. The rear defroster doesnt work as well. I do drive this car daily so i do know it at least runs.

Originally posted by noonereclipse
ive removed close to 30 yards of wires put in that he had connected but removed whatever it was conected to.

I am not sure what is going on here. You removed portions of the OEM harness? Or there was extra wiring by the previous owner that you removed? Are wires physically cut or are harnesses and terminals just unhooked? If they are cut, you are going to have a fun time finding out where they all go - reference the electrical diagram found here - http://nawdu.de/files/ - and be patient. If your next question is how to read wiring diagrams, then this project is not for you as it is far too in depth to describe over the Internet.

Find another 2G that is in OEM shape to reference if possible.

The wires i removed was to things such as speakers, underglow kit, amps, subwoofer, toggle switches to tail light, toggle switch to car horn(seriously he had it to a toggle switch). the oem wire harness has been cut and rewired into a aftermarket black box that i could only link back to a company that makes alarm systems and speaker systems. I'm hoping to trace the wires via their colors. Thank you for the diagrams. Yes i can read them they are nearly set up like the ones i used in the army when i worked on the ch-47 so once again thank you.

i know it doesnt help now.. but get a shop manual. best investment

Originally posted by csmauley
i know it doesnt help now.. but get a shop manual. best investment

FYI, the pdf's at http://nawdu.de/files/ are factory service manuals.