| Go back to previous topic |
| Forum name | 4G63 Tech |
| Topic subject | so i just picked up an evo3 16g |
| Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=67&topic_id=6560 |
6560, so i just picked up an evo3 16g
Posted by hookduphatch, Dec-31-69 06:00 PM
okay. i have this turbo, manifold, and o2 housing sitting here, and the outside is rough. i'm fixing that now. going to clean it up. just looks like it got messy taking the thing off. no shaft play, wheels spins freely. a little corrosion in the intake part going to the fins. going to fix that too. my question is:
someone sent me a link basically showing me how to port the exhaust side of the turbo, because they told me i would boost creep real bad if i didn't open up the hump in front of the wastegate and make sure the wastegate "door" made 90 degrees when it opened. is there any truth in this? do i need to do it? i have a apexi n1 downpipe and exhaust. 3.15 inches most of the way, no cat. that's apparently where the idea stemmed from. someone let me know.
|
6561, RE: so i just picked up an evo3 16g
Posted by T_K, Dec-31-69 06:00 PM
do a search on dsmtalk.com for evoiii 16g creep, there's a lot of info.
|
6562, RE: so i just picked up an evo3 16g
Posted by hookduphatch, Dec-31-69 06:00 PM
never been there, but okay.
|
6563, RE: so i just picked up an evo3 16g
Posted by burntheblobs, Dec-31-69 06:00 PM
Definitely port that hump if you will be running low boost levels. Anything over 18 psi and you most likely wont need to port it though. I have that hump ported, and I am currently running 7 psi on the evo 3 ha. (Don't ask)
|
6564, RE: so i just picked up an evo3 16g
Posted by DR1665, Dec-31-69 06:00 PM
Originally posted by burntheblobs
I am currently running
You wish! :order
|
6565, RE: so i just picked up an evo3 16g
Posted by burntheblobs, Dec-31-69 06:00 PM
Originally posted by DR1665Originally posted by burntheblobs I am currently running You wish! :order
Driggowned.
|
6566, RE: so i just picked up an evo3 16g
Posted by T_K, Dec-31-69 06:00 PM
Originally posted by hookduphatch
never been there, but okay.
One of the best DSM boards out there.
|
6567, RE: so i just picked up an evo3 16g
Posted by eclipzGST, Dec-31-69 06:00 PM
Originally posted by T_KOriginally posted by hookduphatch never been there, but okay. One of the best DSM boards out there.
I wouldn't go THAT far...
|
6568, RE: so i just picked up an evo3 16g
Posted by T_K, Dec-31-69 06:00 PM
Originally posted by eclipzGSTOriginally posted by T_K Originally posted by hookduphatch never been there, but okay. One of the best DSM boards out there. I wouldn't go THAT far...
I would. I've done all kinds of research on arcane DSM topics there and got a lot of answers from old threads.
Then again I have no access to NABR which supposedly is the best?
|
6569, RE: so i just picked up an evo3 16g
Posted by eclipzGST, Dec-31-69 06:00 PM
Originally posted by T_KOriginally posted by eclipzGST Originally posted by T_K Originally posted by hookduphatch never been there, but okay. One of the best DSM boards out there. I wouldn't go THAT far... I would. I've done all kinds of research on arcane DSM topics there and got a lot of answers from old threads. Then again I have no access to NABR which supposedly is the best?
You should still have access to the public archives.
You should also check out www.newengdsm.org They know thier shit!
|
6570, RE: so i just picked up an evo3 16g
Posted by T_K, Dec-31-69 06:00 PM
I tried searching the "tech archive" but it just doesn't work.
|
6571, RE: so i just picked up an evo3 16g
Posted by twack, Dec-31-69 06:00 PM
nice
|