Go back to previous topic
Forum nameHandling/Suspension
Topic subjectshaking in front end
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=6&topic_id=33671
33671, shaking in front end
Posted by predsfan029, Dec-31-69 06:00 PM
over the last 6 months or so i have had a shake/vibration in the front end. at first i thought it was just my tires, but after replacing all four it is still there and has gotten worst in the last 2 months. it is really noticable when i accelerate real hard. i am thinking it is in the steering rack but just wanted to see if anyone have any ideas that maybe i havnt thought of.
33672, RE: shaking in front end
Posted by CODE4, Dec-31-69 06:00 PM
Have you bothered with an alignment?

Inspect tie rods/control arms/bushings/rack?
33673, RE: shaking in front end
Posted by predsfan029, Dec-31-69 06:00 PM
the alignment is good. at lower speeds, you can let the wheel go and it dosnt vere of at all and it looks like the bushings and everything is good. im starting to think its the rack. can the inner tie rods be replaced? is so i may have to look into that before i decide to jus replace the rack
33696, RE: shaking in front end
Posted by electrohead, Dec-31-69 06:00 PM
I had this issue 5 or 6 years ago. I checked tires, wheels, alignment, suspension components, ect. I even thought my tranny was toasted. It ended up being the inner cv joints. I had a garage check them when my car was on the lift and I was told everything was fine. I told them to change the half axles anyway, and the inners literally fell apart during the removal. That was the first time I've seen that happen. That could have caused some serious damage if they fell apart while I was driving. Your half axles may be fine, but it wouldn't hurt checking. Just my .02
33697, RE: shaking in front end
Posted by predsfan029, Dec-31-69 06:00 PM
Originally posted by electrohead
I had this issue 5 or 6 years ago. I checked tires, wheels, alignment, suspension components, ect. I even thought my tranny was toasted. It ended up being the inner cv joints. I had a garage check them when my car was on the lift and I was told everything was fine. I told them to change the half axles anyway, and the inners literally fell apart during the removal. That was the first time I've seen that happen. That could have caused some serious damage if they fell apart while I was driving. Your half axles may be fine, but it wouldn't hurt checking. Just my .02


i dont think its the axels. i noticed a few days ago that at when im accelerating at lower rpm's, it shakes real bad. im starting to think that its a bad motor mount. thats the only thing i can think that will cause it to shake like this. just cruising down the road, it could def be mistaken for a wheel/wheels that need to be balenced, but when i down shift and accelerate, it gets real bad. but the other day when i was leaving work, when i took off, it started shaking even worst and started to get better as the rpms went up. im going to check all the mounts today and report back so if anyone is having similar issues, maybe this will help.
33698, RE: shaking in front end
Posted by ez, Dec-31-69 06:00 PM
If it shakes the entire time you accelerate, it's an axle. If shakes momentarily just as you start accelerating, but then is relatively smooth for the rest of the acceleration, it's your motor mount.
33699, RE: shaking in front end
Posted by Babbz413, Dec-31-69 06:00 PM
Originally posted by predsfan029
the alignment is good. at lower speeds, you can let the wheel go and it dosnt vere of at all and it looks like the bushings and everything is good. im starting to think its the rack. can the inner tie rods be replaced? is so i may have to look into that before i decide to jus replace the rack


Alignment can be off and still hold a straight line. Have you inspected the insides of your rims? I once caked a bunch of mud inside of them which threw my balance off completely and lead to shaking.
33710, RE: shaking in front end
Posted by fast420a83, Dec-31-69 06:00 PM
Hey, just throwing this out there cause I don't know if you found out why your front end shakes, but I would check to see if you rotors are warped. Thats a symptom of shaking and vibration.
33711, RE: shaking in front end
Posted by predsfan029, Dec-31-69 06:00 PM
Originally posted by fast420a83
Hey, just throwing this out there cause I don't know if you found out why your front end shakes, but I would check to see if you rotors are warped. Thats a symptom of shaking and vibration.


if it was the rotors you would really feel it when you are braking and mine dosnt do that but i replaced the driver side axle and that ended up fixing it. it started to get real bad and i could tell that the shaking was coming from the drivers side. before it just felt like the whole front end. replaced the axle and no more vibrations!!
33712, RE: shaking in front end
Posted by fast420a83, Dec-31-69 06:00 PM
Good job. Glad you figured it out!
I generated this page in 0.011358976364136 seconds, executing 7 queries.