So it's a thing I have always liked doing. Taking pictures of work and posting them up to show others it's really not so hard. My lower balljoints on the straight arms were moving alot making a sucking noise. I got new ones from Autozone for around $95 for both sides. They install in less than 30 minutes a side if you're good at this, but shouldn't take more than a hour. You need a pickle fork aka balljoint seperator and a 21mm wrench for the ball joint nut since a socket won't fit and I recommend a 17mm 1/2" socket and breaker bar and 17mm wrench or ratchet for removing and breaking loose the strut at the lca and some wd40:)