Sorry FasterGS, I borrowed your pic.

Alright, on my factory sway bar the "knuckle" where the sway bar attaches to the suspension (it's the little joint in the pic) is broken. Not broken off but the joint at the sway bar is really lose. Any ideas on what happen or how to replace this (besides going to satan)?

>Sorry FasterGS, I borrowed your pic.
>
>Alright, on my factory sway bar the "knuckle" where the sway
>bar attaches to the suspension (it's the little joint in the
>pic) is broken. Not broken off but the joint at the sway bar
>is really lose. Any ideas on what happen or how to replace
>this (besides going to satan)?



Are you talking about the end link that mounts the sway bar to the lower control arm?

The studs on the end link do move. If it's actually worn and to loose, it's not hard to change. The end link it only about $20 from Satan.

Yeah, from being under the car and looking at all that closely that piece isn't hard to replace at all. Probably not that expensive either.

If all you need are the ends links man, I have a couple extra that came off a 96 eclipse that you can have. Let me know.

Duuude, do you happen to have an extra endlink for the front swaybar by any chance?? I've been needing one for years but I can't find em!

I actually need the front one as well. Thanks for all your help guys!:thumbsup

Sorry guys....only ones for the rear.

You can get them at any Mitsu dealer. They might be cheaper at West Broad Mitsubishi...www.pagauto.com

That's where I order my OEM parts from.