Go back to previous topic | Forum name | Engine Management Systems & Controllers | Topic subject | 2.4 ms3 won't start, explosions... | Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=54&topic_id=5848&mesg_id=5848 |
5848, 2.4 ms3 won't start, explosions... Posted by Fabs, Dec-31-69 06:00 PM
Hi everyone.
I just made the 2.4 swap to my Eclipse and I'm trying to get it running...
Setup:
Wiseco's 8.8:1 FIC 850 (low z) - Bosch 30 lb (high z) (Explained after) Holset HX35 MS3 v 3.0 Wasted spark
I tried to start it with my FIC 850 injectors the first time, a lot of explosion were given by the engine, they were so loud, and tried to figured it out what was wrong, after several questions on a facebook group, I changed my low z injectors to high z (30lb bosch) because we all were guessing that my ms couldn't handle them, I changed them and tried to start the engine, explosion came out again but they weren't that loud, today I changed my firing order and injection order to any possible configuration, nothing seems to work; after trying for an hour, I started to change things on my configuration, I saw that changing my Trigger angle/offset to -50 helped the engine a lot, I think it helped because explosion weren't loud, they were just like bubble sounds but I cound't start it...
I will try to upload the msq, msl and a picture at evening, here's is a link with them:
http://www.msextra.com/forums/viewtopic.php?f=131&t=53313
Sorry for the big write up but I've tried everything and it is getting me frustrated...
English is not my native language so I hope I made a good work trying to explain everything lol...
Thanks
Fabs
| |