Originally posted by gilee_8
Hey guys, you mind if you post your AFR table up here so Me and other can take a look at it? Well, I am looking for a AFR table that is used for turboed eclipse. Bascially what I have now is.. below 80kPa: AFR set to around 13.7 80kPa - 100kPa: AFR set to around 13.0 above 100kPa: AFR set to 12.0 and richer I just want to see how yours are like. can you post it as a picture or something. sorry, I dont' have access to my AFR table now, so I cannot post it up. Just want to see a reference on how yours look like. Thanks. P.S. I tried something like: below 80kPa: AFR set to around 15.7 <-- leaner to save gas 80kPa - 100kPa: AFR set to around 14.0 <-- leaner to save gas above 100kPa: AFR set to 12.0 and richer But My EGT goes rocket high... (not rocket high) but it shoot to like 1550F whenever I drive with load (like go up hill) and this is before boosting. so I richen them.

I used Nate(ner947)'s to create mine. His is posted here, just scroll down a little... http://forums.2gnt.com/dcboard.php?az=show_topic&forum=54&topic_id=1997&mesg_id=1997&listing_type=search