2563, Can someone post their AFR Table
Posted by gilee_8, Dec-31-69 06:00 PM
Hey guys, you mind if you post your AFR table up here so Me and other can take a look at it?
Well, I am looking for a AFR table that is used for turboed eclipse.
Bascially what I have now is..
below 80kPa: AFR set to around 13.7
80kPa - 100kPa: AFR set to around 13.0
above 100kPa: AFR set to 12.0 and richer
I just want to see how yours are like. can you post it as a picture or something. sorry, I dont' have access to my AFR table now, so I cannot post it up.
Just want to see a reference on how yours look like.
Thanks.
P.S. I tried something like:
below 80kPa: AFR set to around 15.7 <-- leaner to save gas
80kPa - 100kPa: AFR set to around 14.0 <-- leaner to save gas
above 100kPa: AFR set to 12.0 and richer
But My EGT goes rocket high... (not rocket high) but it shoot to like 1550F whenever I drive with load (like go up hill) and this is before boosting. so I richen them.
|