Go back to previous topic
Forum namePerformance/Engine
Topic subjectRE: What I need to get 200 to 220whp all motor?
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=5&topic_id=64640&mesg_id=64968
64968, RE: What I need to get 200 to 220whp all motor?
Posted by senseiturtle, Dec-31-69 06:00 PM
Even then, actually gaining 10 whp from a single mod is a very tough feat. Only something drastic like cams might be able to produce that.


For example, on my 2gnt, a CAI only netted me an additional 5 hp, and an exhaust approx 4.


Think about what you're asking. 200 WHP, coming from a car that starts at 120... and NO power adders! If you're going to manage that, you're going to need more displacement, MUCH improved air/fuel, and higher revs.

I'd start with a 2.4L motor, bore it to 2.6 (as I believe someone did on this site, I haven't paid way too much attention), get 11:1 or bigger pistons, upgrade fuel components, and THEN start doing everything else. For the same price of putting all this together, you could buy yourself a second eclipse.
I generated this page in 0.0072720050811768 seconds, executing 6 queries.