Go back to previous topic |
Forum name | Performance/Engine |
Topic subject | damn oil press gauge not working |
Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=5&topic_id=473 |
473, damn oil press gauge not working Posted by magnus, Dec-31-69 06:00 PM
i had the oil pressure gauge hooked up with the stock dummy light and the reading was wrong so i took the stock signal off the auto meter gauge and just hooked it up directly now i get no reading at all. could i have messed up the sending unit or the gauge by doing this?????????
|
474, RE: damn oil press gauge not working Posted by Michael_97RS, Dec-31-69 06:00 PM
Need a little more on how you had it set up. I'm assuming it was an electrical not mechanical guage. How did you wire it? Before and after.
"To strive to seek to find... and not to yield." Michael J. Kulaga Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga http://highlander.dsmpower.com/
|
475, RE: damn oil press gauge not working Posted by magnus, Dec-31-69 06:00 PM
ok well the stock sending unit wire broke off the little clip you put on the sending unit so i spliced the stock wire into the auto meter sending unit wire so the auto meter sending unit would send a signal to both the gauge and the dummy light.... Well the gauge readings were all wrong and the dummy light got real bright when i revved the engine. so i disconnected the stock wire. and i have just the autometer sending unit wire going straight to the gauge. now im getting no response from the gauge i checked the ground and the hot source so.......
|
476, RE: damn oil press gauge not working Posted by Michael_97RS, Dec-31-69 06:00 PM
First thing I would do is check the solder on your connections and see if you're making a good connection. Make sure you aren't grounding out anything. If it still looks bad then I would contact autometer and have them check your sending unit or return it as defective if you can, and try another.
"To strive to seek to find... and not to yield." Michael J. Kulaga Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga http://highlander.dsmpower.com/
|