Since you are 1996, I expect that they will hook up an OBD2 scanner at the inspection station. I don't think you have a chance of satisfying the stock ECU with out giving it full control over the engine. I've been running MS and switching back to stock to pass emissions for 8 years now. I re-install stock injectors, stock O2 sensors, hotter BKR5E spark plugs, EGR, set to stock fuel pressure, advance exhaust cam, retard intake cam, as well as give the stock ECU control of injectors, ignition, and IAC. I run a cat year round, so that isn't a problem. Since I'm 1995, I have to pass a rolling dyno test. I think if you can pass that, you can pass the OBD2 test. I've failed enough to know exactly what it takes (for my engine anyways). By now, I have set up the MS harness with stock connectors for injector harness, ignition, and IAC so that switching control from stock to MS is "plug and play".

Corbin
'95 ESI-T

Now with more power and fewer leaks



Humble servant of the Wiki